REGULATORS

PLASMATRONICS ADVANCED SOLAR CHARGE REGULATOR

Features

• LCD display battery voltage, charge current, load current, charging amp hours in, amp hours out, daily minimum, and maximum battery voltage and time at which the battery finished charging.
• one regulator can be used on 12, 24 or 48 V DC systems
• short circuit and reverse battery polarity protected
• 4 preset programmes or user configurable
• can be used with sealed lead acid batteries
• Includes timer function for turning loads on and off, daylight switch
• adjustable load disconnect voltage

PULSE WIDTH MODULATION

Computer interface

• Other advanced features and optional components
• Plug in shunts which allow the PL to incorporate an inverter
• or backup generator in its calculations
• Generator control
• Second battery control
• An alarm triggered by low battery voltage
• Extra controls for larger systems, via an expansion board
• Interface for remote control via a computer and a modem
• Shunt regulation and pulse width modulation options
• Battery temperature sensor
• Remote control

Australian Made

PL20 REGULATOr with bi-directional shunt adaptor

RPLS2

SHUNT

PLS2 Shunt Adaptor

With the optional shunt and shunt interface the PL20 regulator can be used to measure large charge currents from battery chargers, alternator or loads that are to high to run through the plasmatronic regulators like inverters or large amp DC power systems.

RPLY

REGULATORS

ARRID RT1212 SOLAR REGULATORS

The ARRID^TM RT series regulators can be used for DC inputs up to 12 amps to prevent overcharging of batteries. LEDS indicate if the battery is still being charged or is in a fully charged state. The ARRID^TM RT series regulator is also advailable with an equalize option, to help over come sulphation in batteries (RTE). The Equalization mode can be turned on or off with the push of a button.

MADE IN AUSTRALIA

ARRID R1205  regulator

PLASMATRONICS MINI REGULATORS

RA1205

Features

• CMOS technology reduces power consumption of the regulator so that it requires less of the solar panels power. There are no LED indicator lights on this regulator as they add to the power consumption of the unit. This high efficiency regulator is ideal for small modules up to 5 amps.
• Adjustable float for sealed or flooded batteries
• Pulse technology

Two stage regulator, regulates charge from solar panels up to 10 amps. Switches on negative side. Does not contain a blocking diode.

R1205 $78.00

6V3W SOLAR
BATTERY CHARGER

12V 5W SOLAR BATTERY 
CHARGER

If the battery in your vehicle or boat is left without charge for a prolonged time it will become sulphated and useless. To keep the battery charged, it is best to use a 5 W solar panel to keep the battery in a fully charged and operational state.

Please note it usually takes 4-5 W of solar panel to keep an N70Z sized battery charged, a 1 or 2 W panel will not be enough. If there is a drain on the battery, such as an alarm, a larger panel may be required. For dimensions please see page 14.

Helps to prevent batteries flattening, when cars are left without being used. These panels are suitable to trickle charge the 6 volt batteries found in many vintage cars. Available unframed or with an anodized aluminium frame that can be used for mounting.