SINE WAVE INVERTERS

SINE WAVE INVERTERS

BOXER SINE WAVE INVERTERS

Combining tried and true Swiss Technology and solid local knowledge, these inverters mean you may never need mains electricity again. Powered caravan pas, noisy and inconvenient petrol generators and expensive powered boat moorings can all be a thing of the past.

SEAP-24-1K7A

24 Volt

1700watt

5000watt

40mA

.35A DC

19.5kg

SEAP-12-1K3A

12 Volt

1300watt

4000watt

40mA

.60A DC

21kg

230vAC 50Hz +/- 0.02%

91%

460 x 300 x 165mm

2 Years

EVEREST SINE WAVE INVERTERS

The Everest range of sine wave inverters have very high efficiencie's and include the fully adjustable auto start. The size of the minimal load at which the inverter will Automatically respond can be tailored to the individual system. This auto start feature reduces energy consumption as the inverter uses only minimal power in the stand-by mode.

The Everest inverters feature the field serviceability that allows you to avoid costs of shipping a large bulky item around Austria and results in reduced down time for your system. Additional circuit breakers or a change over switch can be installed on the internal Din rail of the inverter through the push out panel located on the front housing of the Everest inverters.

SINE WAVE INVERTERS 

SEA PICCOLO INVERTERS

The "Piccolo" is a compact True Sine Wave Inverter. The inverter employs the latest state of the art technology. Power mosfets, a high efficiency toroidal transformer combine to give you a sophisticated, efficient, yet simple and reliable inverter. D COLSPAN=1 HEIGHT=39>

TEMPO & CHALLENGER 500w SINE WAVE INVERTER

The SEA inverters are compact True Sine Wave Inverters. Take them with you wherever you go, to have freedom with convenience. Conneceither the Challenger or Tempo to a suitable battery, and you have mains power at your fingertips. Just imagine, pulling up at your favourite camping spot, holiday shack or hidden away coastal inlet and having you own silent, clean electrical supply.

BORO SINE WAVE INVERTERS

The Bolero is the newest in the SEA range of Sine Wave inverters. It has all the features that you would expect from this range, such as adjustable autostart, load dependant low voltage cut-out and a DC circuit breaker. The Bolero is a high performance inverter in a new, more compact design.

SELECTRONIC SE1210 & SE1212 SINE WAVE INVERTERS

Features

• Auto start
• True sine wave inverter
• High and low battery voltage cutouts
• Provided with LED warning system
• Continuous battery discharge monitoring
• Totally protected in case of incorrect battery connection
• Fully tested complies to AS 3108 and AS 1044 for radio frequency interference

MADE IN AUSTRALIA

SELECTRONICS WM SERIES SINE WAVE INVERTERS

Features

• Wall mount or bench mount ability
• True sine wave inverter
• Built in serial port expansion interface allows expansion
• Remote keypad option
• LED status indicators
• Adjustable demand start, low volts adjust, AC overload and temperature overload protection, stas and alarm indicators.
• Automatic high and low voltage shutdown, overload protection and overtemperature shutdown.

WM1200-12

SE22, SE32 & SE42 SINE WAVE INVERTERS

Features

• The SE22 will automatically change between 12 and 24 V DC operation.
• True sine wave inverter
• Visual display of inverter status, AC volts, AC amps, and battery volts.
• Automatic high and low voltage shutdown, overload protection and overtemperature shutdown.
• Upgradeable to full Energy nagement MII

MADE IN ATRALIA

ENGY MANAGEMENT MKII

sea Mega fuses

The Energy Management MKII has the ability to read, log, regulate and control your system from either the front panel of your SE inverter, a remote keypad, or remote computer, via a phone line and mem. The Selectronic Energy Management MKII can be installed into any of the SE22, SE32, and SE42 inverters, and will provide the features listed below.

This is the most economical fuse for 100o 300 ampere circuit protection.

Features

• Four general purpose outlets

Two generalurpose analogue outlets

Inverter control

Modem and serial interface

Three external current shunt inputs

Logging functions

Remote keypad interface

Shunt 200 A  75mV

This shunt is compatible with the Selectronics Energy Management System and the Plasmatronics Regulators.

MODIFIED SQUARE WAVE INVERTERS

XANTREX 150W 300W & 500W INVERTERS

For powering small items such as TV, video, radio etc. Not to be used r variable speed motors. 500watt model may be used to power small fridges.

Features

• Reverse polarity protection
• Output overload protection
• Over temperature protection
• High battery voltage shutdown <> Low battery voltage shutdown
• Output short circuit protection
• Soft starting

SINE WAVE INVERTERS

SELECTRONIC LD SINE WAVE INVERTERS

Features

• Auto start on 450 and 550 W models
• True sine wave inverter
• High and low battery voltage cutouts
• Totally protected in case of incorrect battery connection

MADE IN AUSTRALIA

Government  Rebates  Available

Sell Clean Solarnergy Back to Your Power Company!

Take advantage of Commonwealth PVRP fundg. Rebates are now available on solar panels used in grid interactive systems (conditions apply). The costs associated with equipment and installation are not recoverable under the government subsidy. The financial payback period will vary but the scheme may inrest those with an altruistic nature.

SEA GRIDFEED INVERTERS

These inverters are ideally suited for small to medium sized grid feeding applications, it allows the most cost effective method of placing lar power onto the electricity grid without requiring expensive battery banks. The transformer-based design allows maximum Galvanic Insolation input to output.

Features > C Tick Certification

ESAA Approval

2 Year Warranty

30 Day Memory for Time and kWh

LCD Display indicating

Maximum Mains Power Voltage

DC Current

AC Voltage and Watts
Daily and Total kWh produced

Please Note: Solar panels must be added in groups of six (i.e. the system must have either 6, 12, 18, 24 or any number of panels that will divide by six). The size of the invter to be used (2500W or 4000W) is based on the output of the solar panel array. For example: an array of thirty Uni-Solar 64 Watt panels would output 30 x 64 W = 1920 W. In this case, the 2500W inverter would be sufficient.